Canopia Greenhouse Heating Fan with digital thermostatic control 2400-W

Name: Canopia Greenhouse Heating Fan with digital thermostatic control 2400-W
Brand: Canopia
SKU: CANOPIA-ACC-SERRARIS
Price: 199 EUR
Availability: PreOrder

€199.00

Tax Included

Dimensions
Width: 29.5cm
Depth: 26.5 cm
Height: 37cm

You can use Pay in 3 on purchases 30-2000 euros. There's no interest.

Palram - Canopia combo greenhouse heating and fan system with digital thermostat controller allows you to grow comfortably all year round and maintain optimal conditions with confidence and free constant climate management for bio green environment. It offers the best air outlet and climate control available in its group and IPX4 certified design for splash resistance to ensure many years of accurate and consistent climate control. among the best 2400W greenhouse heaters there are.

Powerful 8600 BTU
The largest air outlet and heating cell of the 2400-W greenhouse heaters (233 m³/h). based on a durable 43W fan, equipped with a bearing suitable for humid environments
Digital thermostatic regulator. for use in all seasons.
CE approved for Europe and UK with IP65 external temperature sensor connected with a 1.5m cable to measure the environment in the greenhouse
IPX4 splash resistant - which not only protects against splashes but protects the electrical components from the corrosive environment and therefore more durable.
The durable stainless steel heating element is energy efficient and inexpensive to use
The self-resetting safety limit closes the heater if it overheats and resets it after cooling
Reduced noise - maintains a pleasant environment for gardening while heating
The heater can be used to maintain temperatures below 32°F/0°C making it suitable for growing frost sprouting plants
2 meters heater power cable + 2 meters digital temperature controller cable + 1.5 meters temperature sensor cable
The fan can be used to reduce humidity and heat during summer
Warranty - 2 years

Reference CANOPIA-ACC-SERRARIS

Product code: 705776

Download the Assembly Instructions

It is recommended, if possible, to place the structure on a concrete base (Option A).
This represents the optimal solution as the surface will be flat and dry and the structure can be anchored without difficulty while also ensuring good resistance to strong winds.
Alternatively, other solutions can be adopted.
Use self-locking tiles or reconstructed stone, a wooden floor (Option B) or more simply, if the structure is equipped with a load-bearing floor (Keter), a compact gravel base.
The innovative Biohort platform with ground anchoring screws can also be used on uneven terrain (Option C).
Placing your house on a solid and flat surface improves the stability and durability of the product.